Operation
Transporting the Machine
82 9821/6100-4 82
Figure 71.
A Securing strap (bucket) B Securing strap (front and rear of the two track
legs)
C Skids D Securing strap (kingpost)
Unloading the Machine from the Transporting Vehicle/Trailer
WARNING If the dozer blade is to the rear, the track controls will be reversed. Use extreme caution when
tracking off the trailer.
1. Position the transporting vehicle on solid, level ground.
2. Apply the park brakes and lower any stability jacks.
3. Attach the loading ramps on to the transporter. Ramps must be level with each other in the lowered position.
4. Remove the straps from the machine and stow them.
5. Start the machine and raise the bucket.
6. Raise the dozer.
7. Track slowly to the ramps.
8. Lower the boom until the bucket contacts the ground.
9. Continue to track forward until the tracks are over the lowered ramps.
10. Carefully raise the boom, allowing the machine to rock onto the ramps.
11. Slowly drive off the transporter.
Figure 72.
To Next Page
Loading...
Need help?
General
