20 Please consult your manual for full information or consult your local dealer.
Rotary Switch
3-position voltage selector switch for safe and
quick break and make operation. Lockable with
up to 4 separate padlocks.
Multi voltage selection (where fitted)
A Voltage control rotary switch
1 480/277V Three Phase
2 208/120V Three Phase
3 240/120V Single Phase
D Padlock
Fig 11
IMPORTANT NOTE: Operation of
the rotary switch must only be
carried out with the generator in
stop mode and electrically isolated
to prevent personal injury and
damage to the equipment. Changes
to the alternator voltage must be
completed by a suitably trained and
competent person. Please refer to
the operator manual for detailed
instructions including breaker
protection settings.
NOTICE: A padlock must be
installed to prevent accidental
rotation of the multi voltage switch
whilst the generator is running,
otherwise damage will be caused to
the alternator.
To Next Page
Loading...
Need help?
General
