6
All JRDG products are designed to provide a
lifetime of enjoy-
ment and listening pleasure. The
CONTINUUM Integrated
Ampli-
fier is uniquely constructed from a solid block of precision-
m a c h i n e d
aluminum.
It’s chassis is sealed to prevent dust from entering the
interior of the chassis and thus should never need interior cleaning
during the life
time of the product. All internal circuitry is
mainte-
nance-free such that no adjustments of any kind are necessary over
the lifetime of the product. If the amplifier is ever in need of service,
updating, or upgrading, it should only be returned to an authorized
repair facility or technician for servicing.
The front panel of the unit is precision-machined in a unique process
that incorporates a diamond tipped cutting tool. This process was
refined over many years to produce an attractive and unique appear-
ance. Because
the surface is not finished in the typical fashion of
most audio and
video equipment, there are a few rules that must be
kept in mind when cleaning the equipment.
• Please allow the front panel, which is coated with an automotive-grade polyure-
thane nish, to cure for 6 months before attempting to clean it.
This will prevent
small scratches from marring the surface before the surface coating has had a
chance to harden completely.
• The front panel of the unit should never be cleaned with anything other than a very
soft cotton cloth and plain water or ne oil-based furniture polish. Because of the
ne nish of the front panel, use of any other cleaning agent may permanently
scratch the nish.
• The top cover, sides and bottom are protected by a durable black anodized nish
and can be cleaned with a soft cotton cloth (such as an optical lens cleaning cloth
or ne furniture polishing rag) dampened with plain water. Water should be applied
directly to the cloth and not the chassis. A very mild plastic or glass cleaner that
does not contain ammonia may also be used. If a mark has been left on the
chassis,
do not use any type of abrasive or chemical cleaner to remove the mark.
To Next Page
Loading...
Need help?
General
