Jenny Science XENAX Xvi 48V8 User Manual

12
3 Hardware and Installation
3.1 Environmental Conditions
Storage and transport
No outdoor storage. Warehouses have to be well
ventilated and dry. Temperature from
-25°C up to +55°C
Temperature while operating
5°C -50°C environment,
(above 40°C, nominal current reduced to 6A)
Humidity while operating
10-90% non-condensing
Air conditioning
No external air conditioning needed; integrated heat
sink.
3.2 Assembly and Installation
Assembly with two screws on an electrically
conductive rear wall e.g. the back wall of a switch
cabinet.
For a series mounting, the devices can be mounted
directly next to each other. A distance of more than
1mm between the devices, which is advantageous for
the removal and mounting of a device, is not
necessary.
The distance to the base plate must be at least
40mm.
We recommend mounting the devices in vertical
orientation with the 7-segment display at the top to
ensure a good cooling air circulation.
Where space is limited:
Package with 5 XENAX® Servo controllers mounted on
a base plate with a common connection for the
power supply.
When operating with a power supply motor above
60VDC, the XENAX® Servo controller must be
mounted in an electrical control cabinet and the
XENAX® Servo controller must be connected to
protective earth using the shielding clamp (Art. No.
130.09.00) for motor cable.
When operating with a power supply motor below
or equal 60VDC, a SELV/PELV power supply has to
be used or XENAX® Servo controller must be
connected to protective earth using the shielding
clamp (Art. No. 130.09.00) for motor cable.

Jenny Science XENAX Xvi 48V8 Specifications

General

Brand	Jenny Science
Model	XENAX Xvi 48V8
Category	Controller
Language	English