Section 1 - General Safety Practices
1-2 5376000275
1.2 PRE-OPERATION
OPERATOR TRAINING AND KNOWLEDGE
• Read and understand this manual before operating the machine.
• Do not operate this machine until complete training is performed by authorized
persons.
• Only authorized and qualied personnel can operate the machine.
• Read, understand, and obey all DANGERS, WARNINGS, CAUTIONS, and
operating instructions on the machine and in the manual.
• Use the machine in a manner which is within the scope of its intended application
set by Jerr-Dan.
• All operating personnel must be familiar with the emergency operation of the
machine as specied in this manual.
• Read, understand, and obey all applicable employer, local, and government
regulations as they pertain to the operation of the machine.
ELECTRICAL HAZARDS
• This machine is not insulated and does not provide protection from contact or
being near electrical current. This includes lightning and lightning strikes.
• NEVER operate the machine in an area where overhead power lines, overhead
or underground cables, or other power sources may exist without ensuring the
appropriate power utility company de-energizes the lines.
To Next Page
Loading...
Need help?
General