Section 4: Operation
5376000253 4-11
4.3 UNDERLIFT OPERATION - MANUAL GRIDS
1. Turn on the safety and work
lights. (Switches can be located
in the dash panel, in the
headliner or in the oor mount.)
2. Position the truck within 9 ft. of
the subject vehicle and as close
to the direction of the pull as
possible.
3. Set the truck’s parking brakes
and put the transmission in park
or neutral.
4. Engage the Power-Take-O
(PTO) or Clutch Pump and
the hand controller using the
“Control” switch in the switch
panel.
NEVER TRAVEL WITH
THE POWER TAKE OFF
CONTROL ENGAGED. This
could result in damage to the
PTO unit and the recovery
vehicle’s transmission.
Some PTO/Transmission
combinations allow for the
PTO to be operated during
travel. Consult your specic
PTO Operators Manual.
To Next Page
Loading...
Need help?
General