8
1.5 Securing the Front Relector
1. ROTATE THE FRONT REFLECTOR CLAMP AROUND THE HANDLEBAR UNTIL
THE REFLECTOR IS FACING THE FRONT OF THE BIKE.
2. SLIDE THE REFLECTOR TOWARDS THE CENTER OF THE HANDLEBAR UNTIL
THE REFLECTOR CLAMP FEELS SNUG ON THE THICKER PART OF THE HANDLEBAR.
3. IF NECESSARY, TIGHTEN THE CLAMP ON THE HANDLEBAR FURTHER BY TURN
THE SCREW CLOCKWISE WITH THE PHILLIPSHEAD SCREWDRIVER TIP 8 OF THE MULTITOOL.
FRONT REFLECTOR
PHILLIPSHEAD SCREWDRIVER 8
To Next Page
Loading...
Need help?
General
