2.4 Tire Inlation & Pressure
BEFORE YOUR FIRST RIDE, YOU WILL NEED TO ADD AIR TO THE TIRES TO BRING THEM TO WITHIN THE RECOMMENDED
PRESSURE OF 35 45 PSI POUNDS PER SQUARE INCH. USE A GAUGE TO CHECK THAT THE TIRE PRESSURE FALLS WITHIN
THIS RANGE PRIOR TO EVERY RIDE.
TO ADD AIR:
1. REMOVE THE DUST CAP FROM THE TIRE VALVE ON ONE WHEEL BY TWISTING IT COUNTERCLOCKWISE. SET ASIDE.
2. FOLLOW THE MANUFACTURER’S INSTRUCTIONS ON YOUR AIR PUMP TO INSERT AIR INTO THE TIRE.
CHECK PERIODICALLY WITH A GAUGE AND CONTINUE ADDING AIR UNTIL YOU REACH 35 45 PSI.
3. REMOVE THE AIR PUMP AND REPLACE THE DUST VALVE BY TWISTING IT ON CLOCKWISE.
4. REPEAT WITH THE OTHER TIRE.
IMPORTANT: ONLY USE A MANUAL AIR PUMP TO INFLATE THE TIRES ON YOUR ATLAS. NEVER USE AN AIR COMPRESSOR;
DOING SO MAY CAUSE THE TIRE TUBES TO POP.
TIRE VALVE WITH DUST CAP
To Next Page
Loading...
Need help?
General
