Jetson Light Rider User Manual

13
1.2 Attaching the Training Wheels*
(*IF NEEDED)
YOU WILL NEED THE 15MM WRENCH.
1. LAY THE BIKE FRAME ON ITS SIDE.
2. ON THE SIDE OF THE REAR WHEEL THAT IS FACING
UPWARDS, LOOSEN AND REMOVE THE AXLE NUT
BY TURNING IT COUNTERCLOCKWISE WITH YOUR
FINGERS OR THE 15MM WRENCH.
3. REMOVE THE WASHER UNDERNEATH THE AXLE
NUT BUT DO NOT REMOVE THE SILVER PLATE
UNDERNEATH THE WASHER. SET THE NUT AND
WASHER ASIDE.
AXLE NUT
15MM WRENCH
WASHER
REAR AXLE
REAR WHEEL

Jetson Light Rider Specifications

General

Brand	Jetson
Model	Light Rider
Category	Bicycle
Language	English