Jetson Light Rider User Manual

39
Care & Maintenance
CLEANING THE JETSON LIGHT RIDER
• Carefully wipe with a damp cloth, then dry with a dry cloth.
• Do not apply water directly to the Jetson Light Rider. This can cause damage to the frame and electrical systems, which
could result in malfunctions that lead to personal injury.
STORING THE JETSON LIGHT RIDER
• Remove batteries before storing.
• Cover to protect against dust.
• Store indoors and in a dry place.
CHAIN ADJUSTMENT
The chain must remain on the sprockets. If the chain comes o the sprockets, the coaster brake will not operate.
ADJUSTMENT:
• The chain must be at the correct tightness.
• If too tight, the bicycle will be diicult to pedal.
• If too loose, the chain can come o the sprockets.
When the chain (C) is at the correct tightness, the crank can rotate freely and the chain can be pulled no more than
one-half inch (A) away from a straightedge (B), as shown.
To adjust the chain:
• Loosen the axle nuts of the rear wheel.
• Move the rear wheel forward or backward as necessary.
• Hold the wheel in the desired position and tighten the axle nuts.
IMPORTANT: Make sure the rear wheel is centered under the bicycle frame.
C
B
A CRANK
SPROCKETS
WARNING:
Do not attempt to repair a broken chain. If your chain breaks, bring your
bicycle to a bicycle service shop.

Jetson Light Rider Specifications

General

Brand	Jetson
Model	Light Rider
Category	Bicycle
Language	English