Jetson Light Rider User Manual

26
YOU WILL NEED THE 15MM WRENCH.
1. NOTE THE "R" AND "L" MARKINGS ON THE END OF SPINDLE OF EACH PEDAL, INDICATING "RIGHT" AND "LEFT."
2. ALIGN THE SPINDLE ON "R" PEDAL WITH THE HOLE AT THE END OF THE CRANK ARM ON THE SIDE OF THE BIKE WHERE
YOU WILL PEDAL WITH YOUR RIGHT FOOT.
3. HOLD THE PEDAL BASE STEADY AND, TAKING CARE THAT THE SPINDLE ENTERS THE HOLE STRAIGHT, USE YOUR OTHER
HAND TO TWIST THE SPINDLE CLOCKWISE INTO THE HOLE FOR A FEW ROTATIONS.
1.6 Attaching the Pedals
SPINDLE
CRANK ARM
RIGHT "R" PEDAL

Jetson Light Rider Specifications

General

Brand	Jetson
Model	Light Rider
Category	Bicycle
Language	English