Johnson Controls TEC3630 Series User Manual

TEC3000 Series Single- or Two-Stage Economizer Thermostat Controllers Installation Instructions
10
Figure 9: AUX Contact Wiring
Figure 10: Binary Input Wiring
Setup and Adjustments
Overview
Figure 11 shows the thermostat controller home screen. You can customize it to show or hide various elements
from the occupant. See Table 3 for a listing of the touchscreen icons and Table 10 to identify the home screen
settings under the Display Settings. When screen customization is used in conjunction with a passcode, the
building owner can control which options the occupant can access and adjust.
Figure 11: Thermostat Controller
Home Screen
This model cannot be purchased with a built-in sensor. The only way for the unit to display humidity is if the network
override for humidity is active. If this override is active, the humidity level is displayed on the home screen.
IMPORTANT: Table 10 provides a full list of TEC3000 menu settings. In the upcoming sections, step-by-step
instructions are included on how to access and adjust the more commonly used menus.
IMPORTANT: If lockout levels are used, some icons are hidden. Table 4 provides details of these levels.
AUX Contact
FIG:Aux Contact Wiring
Load
Hot
19 to 30 VAC
FIG:Binary Input Wiring
BI1
Dry Contact
Bi2
Dry Contact

Johnson Controls TEC3630 Series Specifications

General

Brand	Johnson Controls
Model	TEC3630 Series
Category	Thermostat
Language	English