JR PCM9X II Programming

www.modelflight.com.au – World’s best source of JR products
Step #9
W
ing and
T
ail
T
ype Select
In the SYSTEM M. list, rotate the Selector until W i ng
TYPE is highlighted. Depress the Selector to access
the Wing Type menu. If your sailplane has a V-tail
rotate the Selector to highlight V-tail and press the
Selector to select A CT. Rotate the Selector to access
the DU A L F L A P function and press the Selector to
access dual flap if your sailplane has individual servos
for each flap. Press the LIST button to return to the
S
y
stem Mode screen.
Step #10 Ente
r
ing FUNC.LIST
To enter the F unc t i on li s t , turn on the transmitter and
then press the LIST button on the transmitter. The
following screen will appear.
Step #11 Se
r
vo Reve
r
sing
In FUNC. L IST list, rotate the Selector until REV. SW is
highlighted. Press the Selector to access the reverse
switch menu. Rotate the Selector to highlight the
desired channel then press the Selector to reverse the
selected channel‘s direction. Check the direction of all
servos and reverse as necessary. Press the LIST
button to return to
t
he Function Mode screen.
Note: Channel labels may vary due to channel
assi
g
nments, e
g
. RUD =
R
FL and MOT = LFL
7 Sail
p
lane P
r
o
g
r
ammin
g
Guide

JR PCM9X II Specifications

General

Brand	JR
Model	PCM9X II
Category	Receiver
Language	English