Error code Pict Description of error How to recover
E028 Write error Possible to
Data write from server cannot be performed. re-start after
reset.
E029 Lid media slot is open. Possible to
re-start after
reset.
E030 Needle bar upper position failure Turn the hand
Needle bar is out of needle up position. pulley to bring
the needle bar
to its specified
position.
E031 Air presser drop Possible to
Air presser is low. re-start after
reset.
E050 Stop switch Possible to
When stop switch is pressed. re-start after
reset.
E052 Thread breakage detection error Possible to
When thread breakage is detected. re-start after
reset.
A201 Needle replacing time warning Possible to
When number of stitches of operation is reached to number of re-start after
stitches of needle replacement that is set from the panel. reset.
A202 Cleaning time warning Possible to
When operation time of the sewing machine is reached to the re-start after
cleaning time that is set from the panel. reset.
A203 Oil replacement time warning Possible to
When operation time of the sewing machine is reached to the oil re-start after
replacement time that is set from the panel. reset.
E220 Grease-up warning Possible to
When the number of stitches has reached 40 million. re-start after
reset.
– 180 –
To Next Page
Loading...
Need help?
General
