JUKI DLN-415 User Manual

THE STITCH LENGTH
L
Adjusting the stitch length
The stitch length can be adjurteo sly rumng
the iced adjusting dial above the feed lever.
The iigurei an the graduator are rhown in
mm.
2. And match the desired figure with the pin
which ii coming au! irorn the arm.
* The maximum stitch length is 4mm (5/32”)
Pushing pressure of the feed lever
Irrespective oi the length of stitches, the
pull-up spring is somewhat strengthened IO
that during high speed sewing if the hand is
releawd lrom the feed lever. it will positively
return to the original position.
When shorter stitcher are desired or when
the rotation of the machine is to be slowed
down, it ii pasrible to decrease the pushing
preriure oi the feed lever.
1. When the adjurting nut ii loosened, the
pressure will become weaker and ii the nut
is tightened, the pwssure will became
stronger.
-9-

JUKI DLN-415 Specifications

General

Brand	JUKI
Model	DLN-415
Category	Sewing Machine
Language	English