ADJUSTING THE HEIGHT OF THE PRESSER BAR
r
When the height
or
the direction
of
the
presser bar is to be changed due
to
the
exchange of
presrer
foot:
1. Remove the rubber plug of the face plate
2.
From this hole. adjust by loosening the
prerrer bar clamping screw.
3. After the adjustment, securely tighten the
ret
5crew.
;I
ADJUSTING THE AMOUNT OF THREAD TAKE-UP
/.I\\
3-7
b
/
I
/
The
amount
of the thread take-up should
be changed according to the length
oi
stitcher
or
thickness
af
the sewing cloth
to
produce
ideal thread tension.
1. When sewing heavy weight materials,
move
the thread guide
to
your left.
The thread rake-up amount of the take-up
gets more.
2. When sewing light weight materials.
move
the thread guide
to
your right.
The thread take-up amount
gets
less.
-
12
-
To Next Page
Loading...
Need help?
General
