Reverse stitch
1. Press the reverse
stitch button. Begin
sewing.
The reverse stitch is
used at the beginning
and end of a seam to
secure it.
3. Press the reverse
stitch button.
2. Detach the finger
from the reverse
stitch button, sew
the straight stitch.
To start sewing from the
multi-layer material edge,
use the button mounted on
the presser foot to make the
presser foot parallel to the
fabric, thereby ensuring
smooth sewing.
Beginning of sewing heavy-weight fabric
[HZL-30Z]
Pressing the button (spring) that is
mounted on the presser foot into
the groove in the presser foot
holder, lower the presser foot.
Fabric
[1]
[2]
[3]
Hold the upper and bobbin
threads together, pull them out
about 4” and cut them with the
thread cutting groove located
at the rear of the presser foot.
Thread cutter
Pull the upper thread to the
wrong side of the fabric, and
knot the upper and bobbin
threads. Cut the threads as
close to the knot as possible.
This technique is useful for
securing the pattern stitches.
For elastic fabric
straight stitch
Finished seams are
elastic.
This stitch system
can be used for pro-
ducing straight
stitches on elastic
fabrics such as knits
and jersey.
9. Remove the fabric from
the machine.
15
HZL-30Z
HZL-60
HZL-30Z
HZL-60
11. Knot the threads on the
wrong side of the fabric.
10. Cut the threads, using
the thread cutting groove.
After finishing a seam, raise the
needle and the presser foot,
and slowly pull the fabric from
under the presser foot.
Thread
cutting
groove
HZL-30Z
HZL-60
HZL-30Z
HZL-60
HZL-30Z
HZL-60
4. Stop sewing.
To Next Page
Loading...
Need help?
General
