Winding The Bobbin
Threading for winding the bobbin
2. Take out the bobbin.1. Open the hook cover.
7
Thread guide
Bobbin winder
Bobbin winding regulator
HZL-30Z
HZL-60
Thread guide
Bobbin winder
Bobbin winding regulator
HZL-30Z
HZL-60
HZL-30Z
HZL-60
Thread
spool
cap
Small spool
Thread
spool
cap
Large spool
3. Place the thread spool
and cap onto the spool
pin.
Caution:
Turn off the machine before opening the hook cover.
[HZL-30Z]
Adjusting the bobbin thread guide
In the case where the bobbin is unevenly
wound with thread according to the type of
thread, the bobbin thread guide has to be
adjusted.
Move the bob-
bin thread
guide up or
down to adjust
so that the
bobbin is
evenly wound
with thread.
•~•› •~
To Next Page
Need help?
General
