JUKI LH-3578A-7 User Manual

– 14 –
❺
❻
❶
❷ ❸ ❹
(3) Releasing procedure of the grease-up “error” For SC-920
When using the machine for a certain period of time after the display of error No. 220 (continuing using the
machine without performing grease-up at the time of displaying No. 220), error No. 221 is displayed and the
machine stops running.
In this case, apply grease to the specied sections, then reset the error according to the description given in
"(2) Releasing procedure of the grease-up warning for SC-920" p.13
After completion of the operation, turn the power OFF and re-turn it ON to restore the normal operation.
5) When setting No.
❻
is adjusted
to "118", the current set value is
displayed on LED
❺
. Then Press
switch
❹
(switch
❸
) to
change to "1".
6) When the change has been com-
pleted, press switch
❷
or
❶
to specify the changed value.
4-7. Setting up the SC-920
Supply voltage 3-phase 200 to 240V
Frequency 50Hz/60Hz
Operating envi-
ronment
Temperature : 0 to 40˚C
Humidity : 90% or less
Input 320VA
(1) Specications
(2) Installing on the table (LH-3528A-7, 3568A-7, 3578A-7 and 3588A-7)
After completion of the operation, turn the power OFF and re-turn it
ON to restore the normal operation.
1) Hammer decoration bolt
❶
supplied with the LH-
3500A into table.
The decoration bolt supplied with the SC-
920 is not used.
❶
Parts supplied with SC-920
Parts supplied with LH-3500A
❻
❼
❹
❸
❶
❽
❾
󱢳
×
Table
Operator side
When turning OFF the pow-
er before performing this
work, the contents which
have been changed are not
updated.

JUKI LH-3578A-7 Specifications

General

Brand	JUKI
Model	LH-3578A-7
Category	Sewing Machine
Language	English