JUKI MO-1000 User Manual

39
Adjusting the thread tension
Turn the tension dials by quarter or half number, then test sew again and check the result.
• The loops are formed on the underside.
Tighten the upper looper thread tension, (purple) or loosen the lower looper thread tension, red (A).
• The loops are formed on the upper side.
Tighten the lower looper thread tension, (red) or loosen the upper looper thread tension, purple (B).
• The right-hand needle thread forms loops on the underside.
Tighten the right-hand needle thread tension, green (C).
• The left-hand needle thread forms loops on the underside.
Tighten the left-hand needle thread tension, beige (D).
• The edge of the fabric curls up, tension of both looper threads is too tight:
Loosen upper and lower looper thread tensions, purple and red (E).
• The fabric puckers during sewing:
Loosen the right- or left-hand needle thread tension, green or beige (F).
调节线张力
以 1/4 或是半圈来旋转调节刻度盘，进行试缝并确认缝制样品。
•
上弯针出现在面料的反面 ：
 加强上弯针线张力（紫色）或减弱下弯针线张力（红色）(A)。
•
下弯针线出现在面料的正面 ：
 减弱上弯针线张力（紫色）或加强下弯针线张力（红色）(B)。
•
右针线在面料反面呈线环状 ：
 加强右针线张力绿色（C）。
•
左针线在面料反面呈线环状 ：
 加强左针线张力黄色（D）。
•
在缝迹中面料被卷起 ：
 同时减弱上弯针线（紫色）和下弯针线（红色）（E）。
•
面料起皱 ：
 同时减弱右针线（绿色）和左针线（黄色）（F）。
Thread tension /
线张力
8
A
注意
8
A
注意
8
A
注意
8
A
注意
8
A
注意
8
A
注意
A
B
C
D
E
F

JUKI MO-1000 Specifications

General

Brand	JUKI
Model	MO-1000
Category	Sewing Machine
Language	English