7
Contents /
目录
Safety regulations ··············································· 1-3
Contents ······························································ 7
Details of the machine ········································ 8-10
• Accessories ·····················································10
• Thread stand ··················································· 10
Preparing the machine / Using the machine ············ 11,12
• Attaching the foot control ···································· 11
• Waste collector ················································ 11
• Thread, cones, spools ········································ 12
Using the machine
• Main Power/ light switch ····································· 13
• Looper cover ··················································· 13
• Handwheel ······················································ 14
• Changing the presser foot ··································· 15
• Upper knife is deactivated ··································· 16
• How to use the presser foot ································· 17
• Inserting needles / Needles and Threads ··········· 18-21
Adjustments and settings
• Stitch length ···················································· 22
• Cutting width ···················································· 23
• Differential feed ··········································· 24, 25
• Gathering ······················································· 26
• Roll hemming ·················································· 27
• Presser foot pressure ········································ 28
Setting/ Practical sewing
• Preparation/Tips ··············································· 29
Stitch chart ························································· 30
Threading 4/3 Thread OL
• Lower looper ···················································· 32
• Upper looper ···················································· 33
• Right needle ···················································· 34
• Left needle ······················································ 35
• How to use the looper threader ···························· 36
Trial sewing ························································ 37
Thread tension ··············································· 38, 39
Practical Sewing-Overlock
• Sewing in tape ················································· 40
• Carrying out hemming and narrow overlocking ········ 41
• Wrapped overlocking with three threads ················· 42
• 2-/3-thread changeover attachment ······················ 42
• Cover stitch with three threads (atlock) ················· 43
• Thread breakage during sewing ··························· 44
• Unpicking seams ·············································· 44
Securing thread ends at the beginning and end of sewing ·· 45-47
Maintenance
• Cleaning and lubricating ································ 48, 49
• Replacing the knife ············································ 49
Trouble shooting guide ·········································· 50
Technical data ····················································· 52
Optional accessories ············································ 53
安全注意事项
···················································
4-6
目录
···································································
7
各部位的名称
··················································
8-10
•
附件
······························································
10
•
线架
······························································
10
运转前准备 / 使用机器
·····································
11,12
•
安装脚踏控制器
···············································
11
•
集尘装置
························································
11
•
缝线，线圈，线团
···············································
12
使用机器
•
电源 / 照明开关
···············································
13
•
弯针罩板
························································
13
•
手轮
······························································
14
•
更换压脚
························································
15
•
上刀的解除
·····················································
16
•
如何使用压脚
··················································
17
•
安装机针/ 机针和线
·····································
18-21
调整与设置
•
缝迹长度
··················································
22
•
剪切宽度
··················································
23
•
差动送布
···················································
24,25
•
打裥
······························································
26
•
卷边缝
···························································
27
•
压脚压力
························································
28
安装 /实际缝制
•
运转前的准备 / 建议
·········································
29
各个缝迹调节刻度的刻度标准
································
31
4/3 线穿线
•
下弯针
···························································
32
•
上弯针
···························································
33
•
右针
······························································
34
•
左针
······························································
35
•
如何使用弯针穿线工具
······································
36
试缝
·································································
37
线张力
··························································
38,39
实际缝制 - 包缝
•
滚条导轨的使用方法
·········································
40
•
进行卷边缝和窄边包缝
······································
41
•
三线包边缝
·····················································
42
•
2/3线转换器
················································
42
•
3线装饰缝（开口缝）
·········································
43
•
在缝制途中断线时
············································
44
•
拆除线迹的方法
···············································
44
缝制开始与结束时的线头加固
···························
45-47
维修保养
•
清洁和润滑
················································
48,49
•
更换切刀
························································
49
故障及处理方法
··················································
51
技术规格
···························································
52
可选配件
···························································
53
To Next Page
Loading...
Need help?
General
