7
Thread stand
Push the support rod rmly into the socket on the back of the
machine.
Raise the support rod (A) fully, turning slightly until the po-
sition catches engage. Position the thread guide (B) on the
thread stand so that the arrow is to the front.
A
B
B
A
Attaching the foot control
Plug foot control into the machine socket (A) and then into
main
socket (B). The foot control regulates the sewing speed.
The sewing speed can be adjusted by increasing or decreas-
ing the pressure on the foot control.
“WARNING’’
This appliance has a polarized plug (one blade wider than the
other).
To reduce the risk of electric shock, this plug is intended to t
in a polarized main socket only one way.
If the plug does not t fully in the polarized main socket, re-
verse the plug. If it still does not t, contact a qualied electri-
cian to install the proper polarized main socket. Do not modify
the plug in any way. (for USA, Canada only)
Preparing the machine / Using the machine
Details of the machine
Polarized plug
(for USA, Canada only)
Polarized main socket
To Next Page
Loading...
Need help?
General
