– 36 –
(Caution) The needle thread take-up shall be positioned at the lower dead point.
B
A
C
D
Needle thread guide
Needle thread take-up guide
of double-chainstitch ma-
chine
P
Needle thread take-
up lever of double-
chainstitch machine
(24) Position of the thread guides and the looper thread take-ups
MO-6704D MO-6714D MO-6716D
Needle thread
take-up
B
Needle thread
guide
A
B
A
Needle thread take-up lever of
2-needle machine
Needle thread guide of
2-needle machine
The thread hole in the needle thread
guide and the hooked portion of the
needle thread take-up are in the posi-
tion where 2/3 of the hole in the needle
thread guide can be observed.
The thread hole in the needle thread guide and
the hooked portion of the needle thread take-up
are in the position where 2/3 of the hole in the
needle thread guide can be observed.
The thread hole in the double-chainstitch needle
thread guide and the hooked portion of the needle
thread take-up are in the position where the entire
hole in the needle thread guide can be observed.
The thread hole in the needle thread
guide and the hooked portion of the
needle thread take-up are in the posi-
tion where 2/3 of the hole in the needle
thread guide can be observed.
Upper looper thread guide (upper)
Upper looper thread guide (middle)
Looper thread take-up (left)
Looper thread t
ake-up (right)
Lower looper thread take-up
E
N
M
J
H
F
K
G
Upper looper thread guide (right)
Lower looper thread guide
I
L
MO-6 04D MO-6 14D MO-6 16D MO-6 16D MO-6 05D MO-6 04D
(Standard) (Standard) (Standard) (50H) (Blind-hemming) (Soft chain)
General thread Wooly thread General thread Wooly thread General thread Wooly thread General thread General thread Wooly thread General thread
15.8 ←←←←← ← ← ← 13.5
3.4 ←←←1.8 ← 2.6 3.4 ← 2.1
————21.5 ← 2.3 — — —
————30.5 ← 24.5 — — —
22 ←←←←← ← ← ← ←
65 ←←←←← ← ← ← ←
17.5 ←←←←← ← ← ← ←
43.5 ←←←←← ← 40.5 ← 43.5
26.5 ←←←←← ← 24 ← 26.5
38 41 38 ← 34 36 34 38 42 43.5
15 ← 12 15 12 15 12 12 ← 14
6.5 ← 10 ← 6.5 ←← 24 34 ←
29 ←←←27.5 ←← 29 ← 26.5
27 21 23 ← 20 ← 19 24 ← 19
11 ←←←←← ← 12 ← 9.5
————16← 12.8 — — —
Symbol
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
(Unit : mm)
Standard Adjustment
To Next Page
Loading...
Need help?
General
