– 12 –
6. Setting procedure of the machine head
(Caution) For the operation panel other than CP-18, refer to the Instruction Manual for the operation panel to be
used for the setting procedure of the machine head.
1)
Refer to “III-6. Setting of functions of
SC-920” p.23, and call the function
setting No. 95.
2) The type of machine head can be se-
lected by pressing
switch
❺
(
switch
❻
).
* Refer to the
"MACHINE HEAD LIST"
on the separate sheet or the Instruction
Manual for the machine head of your
sewing machine for the type of the
machine head.
3) After selecting the type of machine
head, by pressing switch
❸
(
switch
❹
), the step proceeds to 96
or 94, and the display automatically
changes to the contents of the setting
corresponding with the type of machine
head.
❻
❺❹❸
❻
❺❹❸
❻
❺❹❸
To Next Page
Loading...
Need help?
General
