– 17 –
❻
❺❹❸
❶
❷
❼
Ⓒ
Ⓑ
Ⓐ
Ⓓ
3. Operating procedure of the sewing pattern
Without reverse
stitching
Reverse
stitching
Double reverse
stitching
(Caution) For the operation panel other than CP-18, refer to the Instruction Manual for the operation panel to be
used.
(1) Reverse feed stitching pattern
Reverse feed stitching at sewing start and reverse feed stitching at sewing end can be separately programmed.
[Setting procedure of the reverse feed stitching]
1) Effective/ineffective of the reverse feed
stitching pattern can be changed over
by pressing
switch
❶
.
When the reverse feed stitching
pattern is rendered effective, LED
Ⓒ
lights up, the number of stitches of the
reverse feed stitching at sewing start
is displayed on
Ⓐ
, and the number of
stitches of the reverse feed stitching at
sewing end is displayed on indicator
Ⓑ
.
Select a process (A, B, C or D) the
number of stitches for which is to be
changed by using
switch
❹
.
2) When the number of reverse feed
stitches display is not ashing on and
off, every press on
switch
❸
changes over the reverse feed stitching
mode from the "reverse feed stitching
at sewing start," "double reverse feed
stitching at sewing start" and "no re-
verse feed stitching at sewing start."
In addition, every time switch
❺
is pressed, the reverse feed stitching
feature changes over from the reverse
feed stitching at sewing end to the dou-
ble reverse stitch at sewing end, then to
no reverse feed stitching at sewing end,
in turn.
(Caution) For some types of the machine
head, reverse feed stitching
patterns are not available.
The number which is ashing on and off represents the process which is being set.
Change the number of stitches for the selected process by using switch
❺
and
switch
❻
.
Press switch
❸
to conrm the change you have made. (The number of stitches that can be set is 0 to 15.)
(Caution) The sewing machine cannot perform sewing when the display of the number of stitches for a process
is ashing on and off.
❻
❺❹❸
❶
Ⓑ
Ⓐ
❷
❼
Ⓒ
Ⓓ
To Next Page
Loading...
Need help?
General
