860mm
505mm
160mm min.
220mm
110mm x 110mm
hole for hose access
INSTALLATION
400mm
CUT OUT DIMENSIONS
The cut out must be made from non-combustible material only.
The 400mm tall, non-combustible rear splashback is not necessary provided there
is no combustible material within 500mm of the rear of the BBQ.
If the BBQ is supplied with a duplicate data label, apply this label in the immediate
vicinity of the BBQ in an easily accessible area.
Combustion air openings are located at various locations around the BBQ firebox.
The cutout dimensions explained above must be met to ensure there is adequate
space for entry of air for satisfactory combustion.
Gas vapour is highly explosive and can cause serious bodily injury or damage to
property if allowed to accumulate in a confined space and ignited. If you choose to
build an enclosure to house an LPG cylinder, at least one side of the enclosure
shall be completely open, and ventilation must meet the minimum requirements of
AS5601.1.
23
To Next Page
Loading...
