EasyManuals Logo
Home>Juniper>Network Router>ACX Series

Juniper ACX Series User Manual

Juniper ACX Series
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Safety Warnings
WARNING: See installation instructions before connecting the router. This
is a summary of safety warnings. For a complete list of warnings for this
router, including translations, see the ACX500 Universal Access Router
Hardware Guide at http://www.juniper.net/techpubs/.
CAUTION: To comply with intrabuilding lightning and surge requirements,
intrabuilding wiring must be shielded, and the shield for the wiring must be
grounded at both ends.
WARNING: The intrabuilding ports of the router are suitable for connection
to intrabuilding or unexposed wiring or cabling only. The intrabuilding ports
of the router MUST NOT be metallically connected to interfaces that connect
to the OSP or its wiring. These interfaces are designed for use as intrabuilding
interfaces only (Type 2 or Type 4 ports as described in GR-1089-CORE, Issue
4) and require isolation from the exposed OSP cabling. The addition of primary
protectors is not sufficient protection to connect these interfaces metallically
to OSP wiring.
CAUTION: Before removing or installing components of a router, attach an
ESD strap to an ESD point, and place the other end of the strap around your
bare wrist. Failure to use an ESD strap could result in damage to the router.
CAUTION: Use an external surge protective device (SPD) at the AC input of
the router.
Only trained and qualified personnel should install or replace the router.
Perform only the procedures described in this quick start or the ACX500 Universal
Access Router Hardware Guide. Other services should be performed by authorized
service personnel only.
Read the installation instructions before you connect the router to a power source.
Before installing the router, read the guidelines for site preparation in the ACX500
Universal Access Router Hardware Guide to make sure that the site meets power,
environmental, and clearance requirements for the router.
When installing the router, do not use a ramp inclined more than 10 degrees.
To prevent injury, keep your back straight and lift with your legs, not your back.
21
Safety Warnings

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper ACX Series and is the answer not in the manual?

Juniper ACX Series Specifications

General IconGeneral
BrandJuniper
ModelACX Series
CategoryNetwork Router
LanguageEnglish

Related product manuals