JVC CA-D5T User Manual

Using the Amplifier
=
o
>
Lh
SOUND
MODE
VOLUME
PHONES AUX
POWER
Source, Sound Mode etc. Volume Level
VOLUME
-,+
Sound Mode frequency line
SOUND FADE
MODE MUTING
When the CA-DST is being used, the display shows other items as well.
However, we have only shown the items described in this section.
Turning Power
Turning the CA-D5T On
Saber Press the POWER button.
The displays come on and the Standby indicator goes out.
(=) The CA-DST comes on ready to do whatever it was doing when the power was last shut off.
If the last thing you were doing was listening to a tape in Deck B, you are now ready to listen to
a tape again in Deck B, or you can change to another source.
1 If you were listening to the Tuner last, the Tuner comes on playing the station it was last set to.
Turning the CA-D5T Off
b—4 Press the POWER button again.
The Standby indicator lights up and the displays blank, except for the clock display.
(=) { Some power (17 watts) is always consumed even though power is turned off (called Standby
Mode).
Q) To switch off the Unit completely, unplug the AC power cord from the AC outlet. When you
unplug the AC power cord, the clock will reset to 0:00 right away, and preset Tuner stations will
be erased after a few days.

JVC CA-D5T Specifications

General

Brand	JVC
Model	CA-D5T
Category	Stereo System
Language	English