JVC CA-D5T User Manual

3. Press the <4 or > buttons to select the track to program.
The track number appears in the display.
4. Press the SET button.
The blinking disc number and track number changes to the step number display. Also, the
blinking buttons on the CA-DST stop blinking, but remain lit.
Repeat steps 2 to 4 to select the other tracks for the program.
Press the CD button.
The Unit plays the tracks in the order you have programmed them.
am
(If you try to program a 33rd track, the CA-DST lets you know that the program is full by
displaying the message “FULL” on the display.
(If you try to program an disc tray that is empty, or a track number that does not exist on a disk
(for example, selecting track 14 on a disc that only has 12 tracks), the selected disc or track are
skipped when the program is played.
{ You can skip to a particular program step by pressing the <4 or 1 button during program
play.
Q To play the programmed tracks over and over, press the REPEAT button . “REPEAT” lights up
on the display.
> oot
To stop playing, press the STOP/CANCEL @ button (or the @ button on the Remote Control) once.
To modify the program, press the STOP/CANCEL @ button on the CA-DST while the CD Player is
stopped. With each press of the button, a track is deleted from the program until the last track is
deleted.
To add tracks to the program, use the procedure above (on either the CA-DST or the Remote
Control) to add the new tracks to the program. The new tracks are added to the end of the program.
To delete all the tracks in a program, keep pressing the STOP/CANCEL @ button on the Unit until
all the tracks in the program have been deleted, or press the & button for each disc in the program.
To exit Program Mode, press the PROGRAM/RANDOM button (or the PLAY MODE button on the
Remote Control) twice to change to Continuous Play mode.
Random Play
The tracks will play in no special order when you use this mode.
“CH 7. Press the PROGRAM/RANDOM button (or the PLAY MODE button on the Remote Control) while
the CD Player is stopped to change to the RANDOM Mode display.
= PANDOM © ee.
or s RANDOM SSS i “.. i
sate os
O The display changes with each press of the PROGRAM/RANDOM button, as show below.
PROGRAM > RANDOM > Off (Continuous Play) -> (back to the beginning)
2. Press the CD button (or the > button on the Remote Control)
The tracks are played in random order.
When all of the tracks have been played, the CD Player stops.
Note: Press the DISC buttons (1-3), or the Numeric keys, to cancel Random play and begin
playback in Continuous Play mode.
18

JVC CA-D5T Specifications

General

Brand	JVC
Model	CA-D5T
Category	Stereo System
Language	English