Precautions during Mounting
Securing (mounting) the projector
0
When this unit is to be mounted to a fixed position for
use, install it horizontally.
0
Make
sure to secure the main unit to prevent accidents
such as during an earthquake.
Securing with screws
Remove the four feet at the bottom, and fasten using the
screws (M5 screws, 20 to 25 mm (0.8 to 1.0 in)).
*
Using screws other than ones mentioned may
damage the unit or cause the unit to fall from the
mount.
Securing the projector (ceiling mount)
0
Be sure to ask your dealer to install the unit for you.
Installing the unit on your own may cause the unit to
fall resulting in injury.
0
Take the necessary actions to prevent the main unit
from falling off such as during an earthquake.
0
Regardless
of the warranty period, JVC is not liable for
any product damage caused by mounting the unit with
non-JVC ceiling fittings or to an environment that is not
suited for ceiling mount.
0
When using the unit with it suspended from a ceiling,
pay
attention to the surrounding temperature. When a
heater is in use, the temperature around the ceiling
may be higher than expected.
0
To
attach the unit to the ceiling mount bracket, set the
torque between the range of 1.5N m to 2.0N m.
Tightening with torque exceeding the above range
may cause damage to the unit, which may result the
unit to fall.
0
Use a projector mount that supports more than the
weight of the projector.
0
When reusing the ceiling mount bracket of an old
model, consult the specialist to check if there are any
issues with the surrounding space and increase in
weight.
0
Install
the outlet at an accessible height to unplug from
the wall. Or install the circuit breaker at an accessible
height to shut down the projector. If you need
information, please consult your authorized dealer or
specialist.
21
Set up
To Next Page
Loading...
Need help?
General
