JVC DLA-NZ900 User Manual

Selecting an Image Quality According to the
Video Type
Setting the Picture Mode
1
Press the [MENU] button to display the menu, followed by
using
the ↑↓ keys to select “Content Type”. Next, press [OK]
Doing so enables selection of a picture mode that suits the content for viewing.
Item Description
Auto Switches the video type automatically according to the
input video system.
After
switching automatically, the picture mode switches to
the setting preconfigured in “Auto Pic.Mode Select”. (“Auto
Pic.Mode Select”P. 67)
SDR Picture mode suitable for viewing SDR content. SDR
content includes 2D and 3D content.
HDR10+ Picture mode suitable for viewing HDR10+ content.
HDR10 Picture mode suitable for viewing HDR10 content.
HLG Picture mode suitable for viewing HLG content.
Configuring the video type to “Auto” automatically switches Content Type
according to the input video system.
HDMI Packet Information Content Type
HDR10+ HDR10+
ST2084 HDR10
HLG HLG
Other than the above/Out of Range/No
Signal
SDR
2
1
32
Adjust/Set

JVC DLA-NZ900 Specifications

General

Brand	JVC
Model	DLA-NZ900
Category	Projector
Language	English