ENGLISH
49
Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others
MEMO
4
5
6
Handle
After Replacing the Lamp
Install the new lamp unit
CAUTION
Use only genuine replacement parts
for the lamp unit. Also, never attempt
to reuse an old lamp unit. This may
cause a malfunction.
Do not touch the surface of a new lamp.
This may shorten the lamp life and
cause lamp blowout.
Tighten the screws of the new
lamp unit
Tighten the screws with a
screwdriver.
Do not place the removed lamp unit at
locations that is reachable by children
or near combustible items
.
Dispose used lamp units in the same
.
Follow your
local community rules for disposal.
Attach the lamp cover
Insert the top part (with 2 claws) of the lamp cover into
the unit.
Fasten the screws with a screwdriver.
To Next Page
Loading...
Need help?
General
