Taking Still Images in Intelligent Auto Mode
You can record without worrying about the setting details by using the
Intelligent Auto mode.
1
Open the lens cover.
.
2
Open the LCD monitor and select the still image mode.
.
0
The still image icon B appears.
3
Check if the recording mode is P Intelligent Auto.
.
0
If the mode is H Manual, press the H/T button to switch to P
Intelligent Auto.
The mode changes between Intelligent Auto and Manual with every
press.
4
Set the focus on the subject.
.
0
When focused, the focus icon lights up in green.
5
Take a still image.
.
0
PHOTO lights up when a still image is being captured.
Indications During Still Image Recording
.
Display Icon Description
1
Image Size Displays the icon of the image size.
0
The size of still images can be changed.
“IMAGE SIZE” (A p. 115)
2
Shutter Speed Displays the shutter speed.
3
Focus Lights up in green when focused.
4
Recording in
Progress
Appears when a still image is being captured.
5
Remaining Number
of Shots
Displays the remaining number of shots for still
image recording.
6
Recording Mode Press the i.AUTO button to switch the
recording mode between P (Intelligent Auto)
and H (Manual).
7
Display Button n
Some displays disappear after approximately
3 seconds.
Use the n button to change the displays as
shown below.
0
Tap n button
Displays appear for approximately 3
seconds with every tap.
0
Tap and hold n button
Displays are fixed such that they do not
disappear. After setting, the display button
changes from n to m.
Tap m to release the displays.
8
Battery Indicator Displays the approximate remaining battery
power.
Details of the battery power can be displayed
by pressing the INFO button.
“Remaining Recording Time/Battery Power”
(A p. 49)
9
Recording Media Displays the icon of the media where still
images are recorded to.
The recording media can be changed.
“REC MEDIA FOR IMAGE” (A p. 123)
0
3D/2D Mode Displays the current recording mode of 3D or
2D. “3D” is displayed during 3D recording,
while “2D” is displayed during 2D recording.
Recording
32
To Next Page
Loading...
Need help?
General