14 EN
GETTING STARTED
(cont.)
Memory card
Clipped edge
Card Cover
Loading A Memory Card
(GR-DVM75 only)
The provided memory card is already inserted in the
camcorder when you receive the camcorder.
1
Make sure the camcorder’s power is off.
2
Slide CARD OPEN to open the card cover.
3
Insert the memory card firmly clipped edge first.
•Do not touch the terminal on the reverse side of
the label.
4
To close the card cover, push it until you hear a
click.
To Unload A Memory Card . . .
.... in step 3 push the memory card, then the memory
card comes out of the camcorder automatically. Pull
it out and close the card cover.
NOTES:
●
Be sure to use only SD Memory Cards marked “ ”
or MultiMediaCards marked “ ”.
●
Some brands of memory cards are not compatible with
this camcorder. Before purchasing a memory card,
consult its manufacturer or dealer.
●
Before using a new memory card, it is necessary to
FORMAT the card.
Z
pg. 36
ATTENTION:
Do not insert/remove the memory card while the
camcorder is turned on, as this may cause the
memory card to be corrupted or cause the camcorder
to become unable to recognize whether or not the
card is installed.
Label
CARD OPEN
To Next Page
Loading...
Need help?
General
