18 EN
Operation Mode
Choose the appropriate operation mode according to
your preference using the Power Switch and VIDEO/
MEMORY Switch.
When the Power Switch is set to “ ”,
“ ” appears. When set to “ ” or “ ”,
there is no indication.
To turn on the camcorder, set the Power
Switch to any operation mode except “OFF”
while pressing down the Lock Button located
on the switch.
Power Switch
Lock Button
Power lamp
Power Switch Position
(Manual):
Allows you to set various recording functions using
the Menus. If you want more creative capabilities than
Full Auto recording, try this mode.
(Full Auto):
Allows you to record using NO special effects or
manual adjustments. Suitable for standard recording.
OFF:
Allows you to switch off the camcorder.
:
•Allows you to play back a recording on the tape.
•Allows you to display a still image stored in the
memory card or to transfer a still image stored in the
memory card to a computer.
VIDEO/MEMORY Switch Position
VIDEO:
Allows you to record on a tape or play back a tape. If
“REC SELECT” is set to “ / ” in the DSC
Menu Screen, still images are also recorded in the
memory card.
MEMORY:
Allows you to record a still image or display a still
image stored in the memory card.
VIDEO/MEMORY
Switch
GETTING STARTED
(cont.)
VGA
When the Power Switch is set to “ ” or
“ ” and the VIDEO/MEMORY Switch is set
to “MEMORY”, the selected image size
(“VGA” or “XGA”) is displayed. When set to
“VIDEO”, there is no indication.
To Next Page
Loading...
Need help?
General
