EN11
Loading/Unloading A Cassette
1
OPEN CASSETTE HOLDER
Slide EJECT until the holder opens. Do not use force
to open.
2
INSERT/REMOVE CASSETTE
Make sure the label is facing outward.
3
CLOSE CASSETTE HOLDER
Press the Close button and make sure the holder is
closed and locked.
NOTES:
●
The cassette holder can’t be opened unless a power
supply is attached.
●
Make sure that the tape is not slack when loading the
cassette. If there is any slack, turn the gear on the
cassette in the direction of the arrow to take up the
slack.
●
Make sure the Erase Protection tab is in the position that
allows recording. If not, slide the tab. Some cassettes
have removable tabs. If the tab has been removed, cover
the hole with adhesive tape.
●
The cassette holder cannot be opened while the
camcorder is in the record mode.
Cassette holder
Erase Protection
Gear
Turn to take
up slack.
EJECT Switch
Close Button
To Next Page
Loading...
Need help?
General
