34 EN
S ET
AT
VOLUNE
TAPE END
SP
M 1
:
23
:
45
4
PLAYBACK
Basic Playback
1
LOAD A CASSETTE
Slide EJECT to open the cassette holder, then insert
the cassette with the label facing out. Press the Close
button to ensure the holder is closed and locked.
2
SELECT MODE
Set the Power Switch to “PLAY”. The power lamp
lights.
3
PLAY BACK
Press
4
/6. The playback picture appears.
4
STOP PLAYBACK
Press 5.
Rewind or Fast-Forward the tape
Press
2
to rewind, or
3
to fast-forward the tape during
Stop mode.
NOTES:
●
The camcorder shuts off automatically after about 5
minutes in Stop mode. To turn on again, set the Power
Switch to “OFF”, then to “PLAY”.
●
If a blank portion on the tape is played back, the screen
may become black. This is not a malfunction.
Power Switch
Power lamp
Rewind (
2
) Button
Fast-Forward
(
3
) Button
Play/Pause (
4
/6)
Button
Stop (5) Button
Tape running indicator
4
:Playback
3
:Fast-Forward/
Forward Search
2
:Rewind/Reverse
Search
6 :Still Playback
Tape counter
Battery pack remaining power indicator
Viewfinder indications
EJECT Switch
Recording mode indicator
To Next Page
Loading...
Need help?
General
