EN35
Tracking
This function can be used to eliminate noise bars that
appear on-screen during playback. Initial setting is Auto
Tracking. Manual Tracking is also available.
1
ACTIVATE MANUAL TRACKING
Press P.AE and EFFECT simultaneously. Then, press
P.AE or EFFECT as many times as necessary until the
noise bars disappear.
•To return to Auto Tracking, press P.AE and EFFECT
simultaneously. “AT” blinks. When Auto Tracking
finishes, the indication disappears.
NOTES:
●
When noise bars appear during playback, the
camcorder enters the Auto Tracking mode and “AT” is
displayed.
●
Manual Tracking may not work with tapes recorded on
other VCRs or camcorders.
EFFECT Button
P.AE Button
BRIGHT Dial
PLAYBACK
Features
To Next Page
Loading...
Need help?
General
