26
Change the display information
• See also pages 15 and 16.
To stop play and detach the USB device
Straightly pull it out from the unit.
• Press SRC to listen to another playback source.
To change the source to “USB” while listening
to other playback source
Press SRC to select “USB” if a USB device is attached.
Playback starts automatically.
• If no USB device is attached, “NO USB” appears on
the display. Press SRC to listen to another playback
source.
Listening to the USB device
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player (USB mass storage class
device), portable HDD, etc. to the unit.
Attaching a USB memory
This unit can play DivX/MPEG Video/MP3/WMA/WAV tracks stored in a USB device.
Turn on the monitor to watch the playback picture if you play back a DivX/MPEG file. You can also control playback
by referring to the monitor screen. (See also pages 21 – 24.)
• See pages 18 – 24 for operation using the remote controller.
• See pages 42 and 43 for more settings.
If “
” appears on the monitor when pressing a button, the unit cannot accept the operation you have tried to
do.
• In some cases, without showing “
,” operations will not be accepted.
USB input terminal
USB memory
EN22-29_DV7306_005A_f.indd 26EN22-29_DV7306_005A_f.indd 26 2/9/07 1:50:17 PM2/9/07 1:50:17 PM
To Next Page
Loading...
Need help?
General
