39SETTINGS
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table on pages 40 and 41.
1 Enter the PSM settings.
2 Select a PSM item.
3 Select or adjust the selected PSM item.
4 Repeat steps 2 and 3 to adjust other
PSM items if necessary.
5 Finish the procedure.
Adjusting the sound
1
2 Adjust the level.
FAD *
1
(fader)
Adjust the front and rear speaker
balance.
R06 to F06
BAL (balance)
Adjust the left and right speaker
balance.
L06 to R06
LOUD (loudness)
Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
LOUD ON or
LOUD OFF
SUB.W *
2
(subwoofer)
Adjust subwoofer output balance.
00 to 08;
initial: 04
VOL.A *
3
(volume adjust)
Adjust and store auto-adjustment
volume level for each source,
comparing to the FM volume level.
–05 to +05;
initial: 00
VOL (volume)
Adjust the volume.
00 to 30
(or 50) *
4
*
1
If you are using a two-speaker system, set the fader
level to “00.”
*
2
This takes effect only when a subwoofer is connected.
*
3
You cannot make an adjustment for FM. “FIX”
appears.
*
4
Depending on the amplifier gain control setting. (See
page 41 for details.)
Continued on the next page
EN38-45_DV7306_005A_f.indd 39EN38-45_DV7306_005A_f.indd 39 2/9/07 1:51:02 PM2/9/07 1:51:02 PM
To Next Page
Loading...
Need help?
General
