20
ENGLISH
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your
preference.
2
Adjust the level.
Note:
Normally, the control dial works as the volume
control. So you do not have to select “VOL” to adjust
the volume level.
To decrease the level.
To increase the level.
Equalization pattern changes as you adjust the
bass or treble.
(only for
KD-SX991R)
(only for
KD-SX911R)
VOL
(volume)
BBE / LOUD
(loudness)
(KD-SX911R)
BAS
(bass)
TRE
(treble)
FAD
(fader)
BAL
(balance)
(KD-SX991R)
II
1
Select the item you want to adjust.
Each time you press the button,
the adjustable items change as
follows:
Indication To do: Range
BAS Adjust the bass. –06 (min.)
|
+06 (max.)
TRE Adjust the treble. –06 (min.)
|
+06 (max.)
FAD* Adjust the front R06 (Rear only)
and rear speaker |
balance. F06 (Front only)
BAL Adjust the left L06 (Left only)
and right speaker |
balance. R06 (Right only)
BBE
II
See “Turning on/off
the BBE
II
function”
on page 23.
LOUD Boost low and high
frequencies to
produce a well-
balanced sound
at low volume
level.
VOL Adjust the volume. 00 (min.)
|
50 (max.)
* If you are using a two-speaker system, set the fader
level to “00.”
LOUD ON
|
LOUD OFF
1, 2, 3, OFF
EN20-23.KD-SX991R&911R[E]f 12/18/00, 3:47 PM20
To Next Page
Loading...
Need help?
General
