24
ENGLISH
OTHER MAIN FUNCTIONS
Setting the clock
You can also set the clock system to either 24 hours
or 12 hours.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 25.)
2
Set the hour.
1 Select “CLOCK H” if not shown on the
display.
2 Adjust the hour.
3
Set the minute.
1 Select “CLOCK M.”
2 Adjust the minute.
4
Set the clock system.
1 Select “24H/12H.”
2 Select “24H” or “12H.”
5
Press SEL (select) to finish the
setting.
To check the current clock time while the unit
is turned off, press DISP (display).
The power turns on, the clock time is shown for 5
seconds, then the power turns off.
Changing the general settings
(PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode) control.
Basic Procedure
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 25.)
2
Select the PSM item you want to
adjust. (See page 25.)
3
Adjust the PSM item selected.
2
1
2
1
12
EN24-27.KD-SX991R&911R[E]f 12/18/00, 3:48 PM24
To Next Page
Loading...
Need help?
General
