22
ENGLISH
3
Adjust the bass, treble or BBE
II
*
level
or turn the loudness function** ON/OFF.
• See pages 20 and 23 for details.
4
Repeat steps 2 and 3 to adjust the
other items.
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Call up the sound mode you want to
adjust.
• See “Using the sound control memory”
on page 21 for details.
2
Select “BAS” (bass), “TRE” (treble) or
“BBE
II
”*/“LOUD” (loudness)**.
Ex.: When you select “SOFT”
Ex.: When you adjust “TRE” (treble)
** Only for KD-SX911R
* Only for KD-SX991R
The “LOUD” indicator lights up when the LOUD
function is turned on.
This “BBE
II
” indicator lights up when the BBE
function is set at BBE 2.
Equalization pattern changes as you adjust the bass
or treble.
EN20-23.KD-SX991R&911R[E]f 12/18/00, 3:47 PM22
To Next Page
Loading...
Need help?
General
