JVC KD-T922BT User Manual

20
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Bluetooth — Mobile phone
Receive a call
When there is an incoming call:
• KD-T922BT/KD-X38MDBT:
The buttons will blink in the color you have selected in
[RING COLOR] .
(Page 21)
KD-DB622BT:
The buttons will blink in the blinking pattern you have selected in
[RINGILLUMI] . (Page 21)
• The unit answers the call automatically if
[AUTO ANSWER] is set to a selected
time. (Page 21)
During a call:
• KD-T922BT/KD-X38MDBT:
The buttons stop blinking and illuminate in the color you have selected in
[RING COLOR] . (Page 21)
KD-DB622BT:
The buttons stop blinking.
• If you turn off the unit or detach the faceplate, Bluetooth is disconnected.
Bluetooth®
The following operations may differ or be unavailable depending on the
connected phone.
To On the faceplate
First incoming call...
Answer a call
Press
or the volume knob.
Reject a call
Press and hold
or the volume
knob.
End a call
Press and hold or the volume
knob.
While talking on the first incoming call...
Answer another incoming call
and hold the current call
Press
or the volume knob.
Reject another incoming call
Press and hold
or the volume
knob.
While having two active calls...
End current call and activate
held call
Press and hold
or the volume
knob.
Swap between the current call
and held call
Press
.
Adjust the phone volume*1
[00] to [35] (Default: [15] )
Turn the volume knob during a call.
Switch between hands-free and
private talk modes*2
Press
during a call.
*1 This adjustment will not affect the volume of the other sources.
*2 Operations may vary according to the connected Bluetooth device.
JS_JVC_KD_T922BT_E_EN_2.indd 20JS_JVC_KD_T922BT_E_EN_2.indd 20 4/2/2020 2:04:51 PM4/2/2020 2:04:51 PM

JVC KD-T922BT Specifications

General

Brand	JVC
Model	KD-T922BT
Category	Car Receiver
Language	English