Receiving a call
To receive a call
When there is an incoming call, the source
automatically changes to Bluetooth Phone mode.
“RECEIVING” appears on the display, followed
by the phone number or name.
or
You can also press ////SOURCE on the
remote control to answer a call.
When <AUTO ANSWER> is set to a selected
time, the unit answers incoming call
automatically. (' page 17)
To reject an incoming call or end a
call
(Hold)
or
(Hold)
You can also press and hold ////SOURCE
on the remote control to end a call.
To deactivate/activate hands-free
mode
During a phone conversation...
Operations may vary according to the
connected Bluetooth device.
Adjustments during a call
Phone volume(00 — 50)
[VOLUME 15]: Volume
adjustments made during a call
will not affect the other
sources.
Microphone level
(01— 03)[02]: As the number
increases, the microphone
becomes more sensitive.
Echo cancellation
(01 — 10)[04]: Set the echo
cancellation delay time for
clearer sound.
Text message notification
When a text message is received, the unit rings
and “RCV MESSAGE”#“[Device name]” appears.
<MSG NOTICE> must be set to <ON>.
(' page 17)
You cannot read, edit, or send a message
through the unit.
To clear the message, press any button.
This feature is only available on certain phones.
Switching between two
connected mobile phones
When two mobile phones are connected to the
unit, you can access to both hands-free menus.
Press to enter 1st phone’s hands-free menu.
Press twice to enter 2nd phone’s hands-free
menu.
Press to return to 1st phone’s hands-free
menu.
Bluetooth mobile phone
Bluetooth mobile phone
14
|ޓENGLISH
2012/11/22ޓ10:10:26KD-X250BT_J_EN
To Next Page
Loading...
Need help?
General
Weight and Dimensions
