(Hold)
If no operation is done for about 60 seconds, the
operation will be canceled.
1
2
3
Repeat step 2 if necessary.
To return to the previous menu, press .
To exit from the menu, press DISP or MENU.
Menu item
Selectable setting (Initial: [XX])
DEMO
For settings, ' page 4.
EQ SETTING
EQ PRESET
For settings, ' page 19.
EASY EQ
PRO EQ
AUDIO
FADER *1*2
R06 — F06[00]: Adjusts the front and rear speaker output balance.
BALANCE *2
L06 — R06[00]: Adjusts the left and right speaker output balance.
BASS BOOST +01/+02: Select your preferred bass boost level.
[OFF]: Cancels.
LOUD
(Loudness)
[LOW]/HIGH: Boosts low or high frequencies to produce a well-balanced
sound at a low volume level.
OFF: Cancels.
VOL ADJUST
(Volume adjust)
-05 — +05[00]: Presets the volume adjustment level of each source,
compared to the FM volume level. Before adjustment, select the source you
want to adjust. (“VOL ADJ FIX” appears if “FM” is selected.)
L/O MODE
(Line output
mode)
Select if the REAR/SW terminals are used for connecting the speakers or
subwoofer (through an external amplifier).
SUB.W: Subwoofer
[REAR]: Rear speakers
SUB. W *3
(Subwoofer)
OFF: Cancels.
[ON]: Turns on the subwoofer output.
SUB.W LPF *4
(Subwoofer low-
pass filter)
[THROUGH]: All signals are sent to the subwoofer.
LOW 55Hz/MID 85Hz/HIGH 120Hz: Audio signals with frequencies lower
than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
SUB.W LEVEL *4
(Subwoofer level)
-08 — +08[00]: Adjusts the subwoofer output level.
*1 If you are using a two-speaker system, set the fader level to “00”.
*2 This adjustment will not affect the subwoofer output.
*3 Displayed only when <L/O MODE> is set to <SUB.W>.
*4 Displayed only when <SUB.W> is set to <ON>.
Menu operations
Menu operations
20
|ޓENGLISH
2012/11/22ޓ10:10:26KD-X250BT_J_EN
To Next Page
Loading...
Need help?
General
Weight and Dimensions
