You can connect an external component to the AUX (auxiliary) input jack on the faceplate.
For details, refer also to the instructions supplied with the external components.
Playing an external component
from AUX
Portable audio
player, etc.
3.5 mm (1/8") stereo mini plug
with “L” shaped connector
(not supplied)
Use a 3-terminal plug head
stereo mini plug for optimum
audio output.
.
1
Connect to AUX terminal on the faceplate.
2
Select <AUX>.
3
Turn on the connected component and
start playing the source.
Bluetooth姞 connection
You can operate Bluetooth devices using this unit.
If you turn off the unit or detach the faceplate during a phone call conversation, the Bluetooth
connection is disconnected. Continue the conversation using your mobile phone.
This unit supports the following Bluetooth profiles
Hands-Free Profile (HFP 1.5)
Object Push Profile (OPP 1.1)
Phonebook Access Profile (PBAP 1.0)
Advanced Audio Distribution Profile (A2DP 1.2)
Audio/Video Remote Control Profile (AVRCP 1.3)
Connecting the microphone
MIC
Rear panel
Adjust the microphone angle.
MIC (Microphone input terminal)
Microphone (supplied)
Secure using cord clamps
(not supplied) if necessary.
External components
External components
ENGLISHޓ|
11
2012/11/22ޓ10:10:26KD-X250BT_J_EN
To Next Page
Loading...
Need help?
General
Weight and Dimensions
