JVC KW-M25BT User Manual

21
English |
Installation
Continued on the next page...
Ñ Installation procedure
1) To prevent a short circuit, remove the key from
the ignition and disconnect the ¤ terminal of the
battery.
2) Make the proper input and output wire connections
for each unit.
3) Connect the wire on the wiring harness.
4) Take Connector B on the wiring harness and connect
it to the speaker connector in your vehicle.
5) Take Connector A on the wiring harness and connect
it to the external power connector on your vehicle.
6) Connect the wiring harness connector to the unit.
7) Install the unit in your car.
8) Reconnect the ¤ terminal of the battery.
9) Press the reset button.
Installing the unit
Ñ Non-Japanese cars
Bend the tabs of the
mounting sleeve with
a screwdriver or similar
utensil and attach it in
place.
✎ NOTE
• Make sure that the unit is installed securely in place. If
the unit is unstable, it may malfunction (eg, the sound
may skip).
Ñ Trim plate
1) Attach accessory 1 to the unit.
1
Ñ Microphone unit
1) Check the installation position of the microphone
(accessory 4).
2) Clean the installation surface.
3) Remove the separator of the microphone (accessory
4), and stick the microphone to the place shown
below.
4) Wire the microphone cable up to the unit with it
secured at several positions using tape or other
desired method.
5) Adjust the direction of the microphone (accessory 4)
to the driver.
4
Fix a cable with a commercial item of tape.
✎ NOTE
• Swap the clips if necessary.
!B5A-3197-00_KWM.indb 21 2019/06/11 16:42

JVC KW-M25BT Specifications

General

Display type	LCD
Built-in display	Yes
Display diagonal	6.8 \
Display resolution	800 x 480 pixels
CD-R playback	No
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPEG, PNG
Video formats supported	AVI, H.264, MKV, MPEG1, MPEG2, MPEG4, WMV
USB version	2.0
Bluetooth range	10 m
Bluetooth version	4.2
USB port position	Rear
USB connector type	USB Type-A
USB ports quantity	1
Hands-free calling	Keep your hands on wheel with Bluetooth™ Hands-free calling. After pairing your compatible Bluetooth mobile phone to your TomTom GPS, you’ll be able to see incoming call information, make and answer calls, and talk hands-free through your device. You’ll e
AM band range	531.1 - 1611 kHz
FM band range	87.5 - 108 MHz
Preset stations quantity	30
DIN size	2 DIN
Output power	200 W
Product color	Black
Frequency range	20 - 20000 Hz
Audio output channels	- channels
Equalizer bands quantity	7
Maximum power per channel	50 W
Analog signal format system	NTSC, PAL
Package weight	1600 g

Weight and Dimensions

Depth	75 mm
Width	182 mm
Height	112 mm
Weight	1100 g