66
ENGLISH
What appears to be trouble is not always serious. Check the following points before calling a service center.
• For operations with the external components, refer also to the instructions supplied with the adapters used for the
connections (as well as the instructions supplied with the external components).
If the following messages appear
Message Remedy/Cause
“No Signal”
• Start the playback on the external component connected to VIDEO IN jack.
• Check the cords and connections.
• Signal input is too weak.
“MISWIRING Check wiring
connection then reset unit”
“WARNING Check wiring
connection then reset unit”
A speaker cord has shorted or it has come in to contact with the car chassis. Wire or
insulate the speaker cord as appropriate, then reset the unit ( page 3).
“Parking Brake”
No playback picture is shown when the parking brake is not engaged.
“Eject Error”/“Loading Error”
Eject the disc forcibly. ( page 3)
“Restricted Device”
Check whether the connected iPod/iPhone is compatible with this unit. ( page 26)
“USB Device Error”
“Device Error”
• The USB or micro-USB power voltage is abnormal.
• Turn off and turn on the unit.
• Connect another USB device or smartphone.
“No BT Dongle”
The Bluetooth adapter (KS-UBT1) is removed.
“Connection Error”
The device is registered but the connection has failed. Connect the registered device. ( page 54)
“Please Wait...”
The unit is preparing to use the Bluetooth function. If the message does not disappear,
turn off and turn on the unit, then connect the device again (or reset the unit).
“No Voice Device”
The connected mobile phone does not have the voice recognition system.
“No Data”
No phone book data is contained in the connected Bluetooth phone.
“Initialize Error”
The unit has failed to initialize the Bluetooth module. Try the operation again.
“Dial Error”
Dialing has failed. Try the operation again.
“Hung Up Error”
The call has not ended yet. Park your car, and use the connected mobile phone to end the call.
“Pick Up Error”
The unit has failed to receive a call.
“Pairing Error”
Pairing between the unit and Bluetooth device has failed. Register the device again. ( page 53)
“No Device”
No smartphone is connected, or the connected smartphone is not compatible with MirrorLink.
“Device Connection Error”
The device could not be connected.
“Pandora upgrade required”
The Pandora application on your iPhone/iPod touch/Android/BlackBerry is not the
latest version. Update the application.
“Check Device”
•
Pandora application on your iPhone/iPod touch/Android/BlackBerry is not started up.
• Pandora application is not installed in the connected device.
• Error occurs on the Pandora application.
• You have not been signed in the Pandora.
“No MHL Device”
When <Smartphone> is set to [MHL], no smartphone has been connected, or the
connected smartphone is not compatible with MHL.
Troubleshooting
EN_Trouble1.indd 66 12/11/21 14:21
To Next Page
Loading...
Need help?
General
