JVC KW-V51BT User Manual

32
OTHER EXTERNAL COMPONENTS
OTHER EXTERNAL COMPONENTS
Using external audio/video
players—AV-IN
• When the operation buttons
are not displayed on the screen,
touch the area shown on the
illustration.
– To change settings for video
playback, see page 45.
You can connect an external component to the
AV-IN1 terminal. (Page57 )
 Indications and buttons on the source
control screen
1
Playback information
1 AV-IN name
Operation buttons
[Mode] Changes the AV-IN name.
• Press [H] or [I] to select an AV-IN
name.
 Starting playback
1 Connect an external component to the
AV-IN1 terminal.
• To connect an external component, see
page57 .
2 Select “AV-IN”as the source.
On the Home screen:
3 Turn on the connected component and
start playing the source.
Using external audio players—
Front AUX
(Only for KW-V31BT)
 Indications on the source control
screen
 Starting playback
1 Connect an external component to the
AUX input jack on the monitor panel.
• Use a 3.5 mm stereo mini plug (commercially
available).
2 Select “FrontAUX” as the source.
(Page8)
3 Turn on the connected component and
start playing the source.
KW-VMidJ.indb32 2014/12/0520:12

JVC KW-V51BT Specifications

General

Brand	JVC
Model	KW-V51BT
Category	Receiver
Language	English